Worktops

ESD chipboard laminated on both sides, light gray. Chipboard dissipating electrostatic charge according to EN 61340-5-1 designed for dry environments.

ESD chipboard laminated on both sides, light gray. Chipboard dissipating electrostatic charge according to EN 61340-5-1 designed for dry environments.

ESD chipboard laminated on both sides, light gray. Chipboard dissipating electrostatic charge according to EN 61340-5-1 designed for dry environments.

ESD chipboard laminated on both sides, light gray. Chipboard dissipating electrostatic charge according to EN 61340-5-1 designed for dry environments.

Worktop 27/40 mm waterproof beech joint.

Worktops for workshop tables. Design beech joint or multiplex, beveled edges, treated with a solution of linen fermage and additives. Slab width 1200, 1500, 2000 and 2500 mm, depth 700 and 800 mm, thickness 40 and 50 mm. In stock type D1274-01 and 1574-01 + legs SNP1 in the color light gray RAL 7035.

Beech joint worktops, width 1500 or 2000 mm x depth 750 mm, thickness 25, 40 or 50 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm.

Worktops beech multiplex, width 1500 or 2000 mm x depth 750 mm, thickness 40 mm. Made of layered and glued beech veneer, sanded and treated with a solution of linseed oil with additives, chamfered upper peripheral edges.

LTD worktops, width 1500 or 2000 mm x depth 750 mm, thickness 25 mm, board color light gray RAL 7035, ABS edge 2 mm.

Beech joint worktops with PP or PE board, width 1500 or 2000 mm x depth 750 mm, thickness 25 + 15 mm. This is how a combined board is created, where the beech joint provides good physical properties and the PP and PE boards in turn provide good chemical properties. The color of the plates is white.

LTD worktops with rubber, width 1500 or 2000 mm x depth 750 mm, thickness 25 mm, color of the board light gray. There is a choice of smooth rubber with a thickness of 4 mm, rubber with a wheel pattern with a thickness of 4 mm or grooved rubber with a thickness of 6 mm.

Worktops beech joint with rubber, width 1500 or 2000 mm x depth 750 mm, thickness 25 or 40 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges. There is a choice of smooth rubber with a thickness of 4 mm, rubber with a wheel pattern with a thickness of 4 mm or grooved rubber with a thickness of 6 mm.

Worktops beech joint, width 1500 or 2000 mm x depth 750 mm, thickness 25 or 40 mm. The plate is plated with zinc or stainless steel 1 mm thick. It covers the entire surface of the board and 3/4 of the front edge.

Worktops beech joint, width 1500 or 2000 mm x depth 750 mm, thickness 25 or 40 mm. The front edge of the board is plated with zinc or stainless steel sheet 1 mm thick in a U shape - the board is thus protected from three sides. The upper part of the plate is lowered in the place of plating so that there is no step.