Search results for "Worktop"

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 50 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 860 mm.

Worktop beech joint with rubber, width 1500 mm x depth 750 mm, thickness 25 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges.

Worktop beech joint with rubber, width 2000 mm x depth 750 mm, thickness 25 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges.

Worktops beech joint with rubber, width 1500 or 2000 mm x depth 750 mm, thickness 25 or 40 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges. There is a choice of smooth rubber with a thickness of 4 mm, rubber with a wheel pattern with a thickness of 4 mm or grooved rubber with a thickness of 6 mm.

Worktop beech joint, width 1500 mm x depth 750 mm, thickness 25 mm. The plate is plated with 1 mm thick zinc sheet. It covers the entire surface of the board and 3/4 of the front edge.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 25 mm. The plate is plated with zinc sheet 1 mm thick. It covers the entire surface of the board and 3/4 of the front edge.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 40 mm. The plate is plated with 1 mm thick zinc sheet. It covers the entire surface of the board and 3/4 of the front edge.

Worktops beech joint, width 1500 or 2000 mm x depth 750 mm, thickness 25 or 40 mm. The plate is plated with zinc or stainless steel 1 mm thick. It covers the entire surface of the board and 3/4 of the front edge.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 25 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 835 mm.

Worktop beech joint, width 1500 mm x depth 750 mm, thickness 25 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 835 mm.

Worktop beech joint, width 1500 mm x depth 750 mm, thickness 50 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 860 mm.

Worktop for workshop tables. Profiled beech prisms glued into flat boards, beveled edges, treated with a solution of linseed fermage and additives. Board width 1500 mm, depth 800 mm, thickness 50 mm. In stock type D1274-01 and 1574-01 + legs SNP1 in the color light gray RAL 7035.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 40 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 850 mm.

Worktop beech joint, width 2000 x depth 750 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 835 mm.

Worktop for workshop tables. Layered pressed beech veneers, chamfered edges, treated with a solution of linen fermage and additives. Board width 2500 mm, depth 800 mm, thickness 40 mm.

Worktop for workshop tables. Layered pressed beech veneers, chamfered edges, treated with a solution of linen fermage and additives. Board width 2000 mm, depth 800 mm, thickness 40 mm.

Worktop for workshop tables. Layered pressed beech veneers, chamfered edges, treated with a solution of linen fermage and additives. Board width 1500 mm, depth 800 mm, thickness 40 mm.

Worktop for workshop tables. Layered pressed beech veneers, chamfered edges, treated with a solution of linen fermage and additives. Board width 2500 mm, depth 700 mm, thickness 40 mm.

Worktop for workshop tables. Layered pressed beech veneers, chamfered edges, treated with a solution of linen fermage and additives. Board width 2000 mm, depth 700 mm, thickness 40 mm.

Worktop for workshop tables. Profiled beech prisms glued into flat boards, beveled edges, treated with a solution of linseed fermage and additives. Board width 2500 mm, depth 800 mm, thickness 50 mm. In stock type D1274-01 and 1574-01 + legs SNP1 in the color light gray RAL 7035.

Worktop for workshop tables. Profiled beech prisms glued into flat boards, beveled edges, treated with a solution of linseed fermage and additives. Board width 2000 mm, depth 800 mm, thickness 50 mm. In stock type D1274-01 and 1574-01 + legs SNP1 in the color light gray RAL 7035.