Accessories for 19 x 27 cabinets

Doors with a threshold for 19D wide cabinets, version with drawers. The technical design of the door makes it possible to change the opening of the door from right to left. Door height 550, 650, 700 or 800 mm. It cannot be used in cases with a chip or code lock.

Doors for cabinets with a width of 19D, version without drawers. The technical design of the door makes it possible to change the opening of the door from right to left. Door height 500, 600, 650 or 750 mm. It cannot be used in cases with a chip or code lock.

Adjustable shelf for ZL drawer cabinets, supplied including 4 hooks, width 428, depth 515 mm, load capacity 50 kg.

Plinth for drawer cabinets POLAK type ZL 19 x 27D, height 100 mm. The cabinet is fixed to the plinth with screws - part of the plinth delivery. Part of the plinth are removable fronts, after removal it is possible to drive under the cabinet on the plinth with a VZV trolley. Can be ordered additionally.

ZL drawer lining, 3 mm thick foam rubber, width 323, depth 459 mm, weight 0.1 kg.

Plastic drawer dividers of ZL series cabinets, 6x two-part channel, channel width 70 mm, 12x partitions, weight 0.6 kg.

Plastic drawer dividers of the ZL series, 6x boxes, 6x large dividers, 12x small dividers, weight 0.6 kg.

Metal drawer dividers, 4 fields, for ZL drawers (internal drawer dimensions 323 x 459 mm). For drawer front height 75 - 300 mm.

Metal drawer dividers, 9 fields, for ZL drawers (internal drawer dimensions 323 x 459 mm). For drawer front height 75 - 300 mm.

Metal drawer dividers, 12 fields, for ZL drawers (internal drawer dimensions 323 x 459 mm). For drawer front height 75 - 300 mm.

Plastic drawer dividers of ZL series cabinets, 6x three-part channel, channel width 45 mm, 18x partitions, weight 0.7 kg.

Plastic drawer dividers of the ZL series, 6x four-part channel, channel width 33 mm, 24x partitions, weight 0.8 kg.

Slot division 19D. Width 323 mm, for the height of drawer fronts 75 - 300 mm. Spacing of grooves 17 mm, can be divided by smooth division according to your needs. The partition can be inserted into the drawer both horizontally and vertically, just choose the correct width according to the internal dimensions of the drawer.

Slot division 27D. Width 459 mm, for the height of drawer fronts 75 - 300 mm. Spacing of grooves 17 mm, can be divided by smooth division according to your needs. The partition can be inserted into the drawer both horizontally and vertically, just choose the correct width according to the internal dimensions of the drawer.

Transverse (smooth) division. Width 68 - 459 mm, for drawer front height 75 mm. It is used to divide the drawers as part of the slot division, adjustable by 17 mm.

Transverse (smooth) division. Width 68 - 459 mm, for the height of drawer fronts 100 and 125 mm. It is used to divide the drawers as part of the slot division, adjustable by 17 mm.