Accessories for 27 x 27 cabinets

Doors for cabinets with a width of 27D, version without drawers. The technical design of the door makes it possible to change the opening of the door from right to left. Door height 500, 600, 650 or 750 mm. It cannot be used in cases with a chip or code lock.

Doors with a threshold for 27D wide cabinets, version with drawers. The technical design of the door makes it possible to change the opening of the door from right to left. Door height 550, 650, 700 or 800 mm. It cannot be used in cases with a chip or code lock.

Metal drawer dividers, 4 fields, for ZA drawers (inner drawer dimensions 459 x 459 mm). For drawer front height 75 - 300 mm.

Metal drawer dividers, 9 fields, for ZA drawers (inner drawer dimensions 459 x 459 mm). For drawer front height 75 - 300 mm.

Metal drawer dividers, 12 fields, for ZA drawers (inner drawer dimensions 459 x 459 mm). For drawer front height 75 - 300 mm.

ZA drawer lining, 3 mm thick foam rubber, width 459, depth 459 mm, weight 0.1 kg.

Plastic drawer dividers of the ZA series, 9x two-part channel, channel width 70 mm, 18x partitions, weight 0.8 kg.

Plastic drawer dividers of the ZA series, 9x boxes, 9x large dividers, 18x small dividers, weight 0.9 kg.

Plastic drawer dividers of the ZA series, 9x three-part channel, channel width 45 mm, 27x partitions, weight 0.9 kg.

Plastic drawer dividers of the ZA series, 9x four-part channel, channel width 33 mm, 36x partitions, weight 1.2 kg.

Adjustable drawer cabinet shelf ZA, supplied including 4 hooks, width 564, depth 515 mm, load capacity 50 kg.

Wooden top plate for POLAK drawer cabinets type ZA 27 x 27D, thickness 40 mm. It is screwed to the cabinet lid, can be ordered additionally.

Plinth for drawer cabinets POLAK type ZA 27 x 27D, height 100 mm. The cabinet is fixed to the plinth with screws - part of the plinth delivery. Part of the plinth are removable fronts, after removal it is possible to drive under the cabinet on the plinth with a VZV trolley. Can be ordered additionally.

Adjustable shelf for MS101, MS101K, MS103 and MS103K inspection workstations and PS workshop table bodies, supplied with 4 hooks, width 590, depth 480mm. Galvanizing.

Adjustable shelf for MS102, MS102K, MS104 and MS104K inspection workstations, supplied with 4 hooks, width 590, depth 680mm. Galvanized design, load capacity 50 kg.

Slot division 27D. Width 459 mm, for the height of drawer fronts 75 - 300 mm. Spacing of grooves 17 mm, can be divided by smooth division according to your needs. The partition can be inserted into the drawer both horizontally and vertically, just choose the correct width according to the internal dimensions of the drawer.