Accessories for 36 x 36 cabinets

Doors with a threshold for 36D wide cabinets, version with drawers. The technical design of the door makes it possible to change the opening of the door from right to left. Door height 550, 650, 700 or 800 mm. It cannot be used in cases with a chip or code lock.

Doors for cabinets with a width of 36D, version without drawers. The technical design of the door makes it possible to change the opening of the door from right to left. Door height 500, 600, 650 or 750 mm. It cannot be used in cases with a chip or code lock.

Adjustable shelf for ZB drawer cabinets, supplied including 4 hooks, width 717, depth 665 mm, load capacity 50 kg.

Wooden top plate for POLAK drawer cabinets type ZB 36 x 36D, thickness 40 mm. It is screwed to the cabinet lid, can be ordered additionally.

Plinth for drawer cabinets POLAK type ZB 36 x 36D, height 100 mm. The cabinet is fixed to the plinth with screws - part of the plinth delivery. Part of the plinth are removable fronts, after removal it is possible to drive under the cabinet on the plinth with a VZV trolley. Can be ordered additionally.

Metal drawer dividers, 4 fields, for ZB drawers (internal drawer dimensions 612 x 612 mm). For drawer front height 75 - 300 mm.

Metal drawer dividers, 9 fields, for ZB drawers (internal drawer dimensions 612 x 612 mm). For drawer front height 75 - 300 mm.

Metal drawer dividers, 12 fields, for ZB drawers (internal drawer dimensions 612 x 612 mm). For drawer front height 75 - 300 mm.

ZB drawer lining, 3 mm thick foam rubber, width 612, depth 612 mm, weight 0.1 kg.

Plastic drawer dividers of the ZB series, 16x two-part channel, channel width 70 mm, 32x partitions, weight 1.5 kg.

Plastic drawer dividers of the ZB series, 16x box, 16x large partition, 32x small partition, weight 1.6 kg.

Plastic drawer dividers of the ZB series, 16x three-part channel, channel width 45 mm, 48x partitions, weight 1.8 kg.

Plastic drawer dividers of the ZB series, 16x four-part channel, channel width 33 mm, 64x partitions, weight 2.1 kg.

Slot division 36D. Width 612 mm, for the height of drawer fronts 75 - 300 mm. Spacing of grooves 17 mm, can be divided by smooth division according to your needs. The partition can be inserted into the drawer both horizontally and vertically, just choose the correct width according to the internal dimensions of the drawer.

Transverse (smooth) division. Width 68 - 459 mm, for drawer front height 75 mm. It is used to divide the drawers as part of the slot division, adjustable by 17 mm.

Transverse (smooth) division. Width 68 - 459 mm, for the height of drawer fronts 100 and 125 mm. It is used to divide the drawers as part of the slot division, adjustable by 17 mm.