Catalog

Computer cabinet type PCS 02A

Code: PCS_02_A

Computer cabinet with lockable door, one adjustable shelf, pull-out drawer for printer and pull-out shelf for keyboard behind hinged door, mobile. Height 1960 x width 610 x depth 600 mm, weight 80.7 full description and parameters

Made to order, delivery time 8 - 10 weeks. It may vary depending on the manufacturer's capacity.

630.65 Eur (763.09 Eur with VAT)
Product description

Computer cabinet type PCS 02A

Computer cabinet with lockable door, one adjustable shelf, pull-out drawer for printer and pull-out shelf for keyboard behind hinged door, mobile. Height 1960 x width 610 x depth 600 mm, weight 80.7 kg. Body color RAL 7035 light gray.

  • glazed doors are fitted with 4 mm thick safety tempered glass in a steel frame
  • internal hinges allow the door to be opened by 110°
  • one shelf adjustable by 25 mm
  • shelf load capacity 60 kg
  • pull-out drawer for a printer with a load capacity of 40 kg
  • lockable hinged door with pull-out keyboard drawer
  • two-point door locking
  • travel wheels - 2x fixed, 2x swivel with brake, diameter 80 mm
  • body capacity 200 kg
Technical parameters
Height
1960 mm
Width
610 mm
Depth
600 mm
Mass
80.7 kg
Number of shelves
1
Number of sockets
1
Warranty (years)
2
Manufacturer
Similar products
Country of origin
Computer cabinet type PCS 01A Code: PCS_01_A

Computer cabinet with lockable door, one adjustable shelf, pull-out printer drawer and pull-out keyboard shelf behind hinged door. Height 1850 x width 610 x depth 600 mm, weight 75.6 kg. Body color RAL 7035 light gray.

Country of origin
Computer cabinet type PCS 0001 Code: PCS_0001

Computer cabinet with lockable door and one shelf. Height 1700 x width 600 x depth 400 mm, weight 43.5 kg. Body color RAL 7035 light gray.

Country of origin
Computer cabinet type PCS 03A Code: PCS_03_A

Computer cabinet with lockable door, one adjustable shelf and a pull-out keyboard shelf behind the hinged door. Height 1600 x width 610 x depth 600 mm. Body color RAL 7035 light gray.

Country of origin
Computer cabinet type PCS 04A Code: PCS_04_A

Computer cabinet with lockable door, one adjustable shelf and a pull-out keyboard shelf behind the hinged door, mobile. Height 1710 x width 610 x depth 600 mm. Body color RAL 7035 light gray.

Country of origin
PCZB computer cabinet Code: PCZB

PCZB computer cabinet. Hinged door with tempered glass and sliding monitor holder, 1x drawer 100E with extendable bottom for keyboard, 1x door with threshold DP36-800 + 1x internal shelf. Overall dimensions - height 1345 x width 753 x depth 731 mm.

Country of origin
Computer cabinet mobile PCZBM Code: PCZBM

PCZBM computer cabinet. Hinged door with tempered glass and sliding monitor holder, 1x drawer 100E with extendable bottom for keyboard, 1x door with threshold DP36-800 + 1x internal shelf. Overall dimensions - height 1475 x width 753 x depth 731 mm.

Information / documents
KOVOS electronic workshop table configurator

KOVOS worktops are made of wood. Wood is a natural material, and therefore due to changes in temperature or humidity, the boards may slightly curve, even though special care is taken in their surface treatment. The stability of the shape of the worktop is guaranteed at a relative air humidity of 50 - 60%. Wooden table tops should definitely not come into direct contact with water and are intended exclusively for interior use. Also, the color of the boards may differ slightly from each other, depending on the input lumber used.

Highly durable worktop layered and glued from beech veneer, sanded and treated with a solution of linseed oil with additives, the upper peripheral edges are bevelled. We offer the board in a thickness of 40 mm.

Laminated chipboard LTD, we offer the board in a standard thickness of 25 mm with an ABS edge of 2 mm, shade RAL 7035 light gray.

Board with a raised edge on three sides, the edges are made of 25 mm thick beech joint, their height is 120 mm. The board is sanded and treated with a solution of linseed oil with additives, the upper peripheral edges are bevelled. We offer raised edges for beech joint thicknesses of 25, 40 and 50 mm.

The front edge of the plate is plated with galvanized or stainless steel sheet 1 mm thick. The sheeting is U-shaped, so the plate is protected from above and below. The upper part of the plate is lowered in the place of plating so that the plating continues smoothly on the plate. We offer plating for beech joints of thickness 25 and 40 mm.

There is a choice of smooth rubber with a thickness of 4 mm, rubber with a wheel pattern with a thickness of 4 mm or grooved rubber with a fine groove of 6 mm. We offer rubbers for all types of boards.

smooth rubber 4 mm

wheel pattern 4 mm

grooved rubber 6 mm

PP boards with a thickness of 15 mm are attached to a beech joint with a thickness of 25 mm, thus creating a combined board, where the beech joint ensures good physical properties and the PP board with good chemical properties. We offer PP boards in white and black.

Main advantages of PP board:

- light, stable, elastic, sterile
- high insulating ability
- high load shock absorbing
- acid resistant
- safe for food
- recyclable
- production without additives harmful to the environment and health

PE boards with a thickness of 15 mm are attached to a beech joint with a thickness of 25 mm, thereby creating a combined board, where the beech joint ensures good physical properties and the PE board with good chemical properties. We offer PP boards in white and black.

The main advantages of PE board:

- higher chemical resistance
- good impact expansion
- shock-absorbing and impact-resistant even at low temperatures
- well weldable
- well thermoformable
- waterproof
- very good electrical insulation capabilities
- recommended for food storage
- physiologically unsuspicious
- suitable for contact with drinking water

Do you have further questions?

Do you have a question about this product? Write to us and we will be happy to answer you.