Catalog

Kovos workshop cabinet with plastic boxes SPZ_12_0002_C_VAR_2

Code: SPZ_12_0002_C_VAR_2

Workshop cabinet with plastic containers. Height 1150 x width 950 x depth 400 mm. More information about plastic boxes in the entire description (see left menu). full description and parameters

Kovos workshop cabinet for plastic boxes SPZ_12_0002_C
Kovos workshop cabinet for plastic boxes SPZ_12_0002_C

Made to order, delivery time 4 - 6 weeks. It may vary depending on the manufacturer's capacity.

Small shelf for license plate cabinets SPZ_11_P1
Small shelf for license plate cabinets SPZ_11_P1
In stock: 8 pcs
16× Rail for hanging plastic boxes QDN_43_03_1 pc
Rail for hanging plastic boxes QDN_43_03_1 pc

Made to order, delivery time 4 - 6 weeks. It may vary depending on the manufacturer's capacity.

678.15 Eur (820.56 Eur with VAT)
Product description

Kovos workshop cabinet with plastic boxes SPZ_12_0002_C_VAR_2

Workshop cabinet with plastic containers. Height 1150 x width 950 x depth 400 mm. More information about plastic boxes in the entire description (see left menu).

  • workshop cabinet with plastic containers
  • height 1150 mm
  • width 950 mm
  • depth 400 mm
  • 5x shelves
  • 16x rail for hanging boxes
  • 36x plastic container 456209, color red, height 125 x width 150 x depth 235 mm
  • 48x plastic container 456202, color yellow, height 60 x width 102 x depth 100 mm
Technical parameters
Total height
1150 mm
Width
950 mm
Depth
400 mm
Execution
with plastic boxes
Number of plastic containers
84
Number of shelves
5
Welded product
Yes
Warranty (years)
2
Manufacturer
All models
Technical parameters
Code
Welded product
Number of shelves
Number of plastic containers
Execution
Total height
Width
Depth
In stock
Price
SPZ_12_0002_C_VAR_1
Yes
5
76
with plastic boxes
1150 mm
950 mm
400 mm
No
671.71 Eur
You are currently browsing
SPZ_12_0002_C_VAR_2
Yes
5
84
with plastic boxes
1150 mm
950 mm
400 mm
No
678.15 Eur
SPZ_12_0002_C_VAR_3
Yes
7
112
with plastic boxes
1150 mm
950 mm
400 mm
No
702.01 Eur
SPZ_12_0002_C_VAR_4
Yes
6
98
with plastic boxes
1150 mm
950 mm
400 mm
No
690.08 Eur
Similar products
Information / documents
KOVOS electronic workshop table configurator

KOVOS worktops are made of wood. Wood is a natural material, and therefore due to changes in temperature or humidity, the boards may slightly curve, even though special care is taken in their surface treatment. The stability of the shape of the worktop is guaranteed at a relative air humidity of 50 - 60%. Wooden table tops should definitely not come into direct contact with water and are intended exclusively for interior use. Also, the color of the boards may differ slightly from each other, depending on the input lumber used.

Highly durable worktop layered and glued from beech veneer, sanded and treated with a solution of linseed oil with additives, the upper peripheral edges are bevelled. We offer the board in a thickness of 40 mm.

Laminated chipboard LTD, we offer the board in a standard thickness of 25 mm with an ABS edge of 2 mm, shade RAL 7035 light gray.

Board with a raised edge on three sides, the edges are made of 25 mm thick beech joint, their height is 120 mm. The board is sanded and treated with a solution of linseed oil with additives, the upper peripheral edges are bevelled. We offer raised edges for beech joint thicknesses of 25, 40 and 50 mm.

The front edge of the plate is plated with galvanized or stainless steel sheet 1 mm thick. The sheeting is U-shaped, so the plate is protected from above and below. The upper part of the plate is lowered in the place of plating so that the plating continues smoothly on the plate. We offer plating for beech joints of thickness 25 and 40 mm.

There is a choice of smooth rubber with a thickness of 4 mm, rubber with a wheel pattern with a thickness of 4 mm or grooved rubber with a fine groove of 6 mm. We offer rubbers for all types of boards.

smooth rubber 4 mm

wheel pattern 4 mm

grooved rubber 6 mm

PP boards with a thickness of 15 mm are attached to a beech joint with a thickness of 25 mm, thus creating a combined board, where the beech joint ensures good physical properties and the PP board with good chemical properties. We offer PP boards in white and black.

Main advantages of PP board:

- light, stable, elastic, sterile
- high insulating ability
- high load shock absorbing
- acid resistant
- safe for food
- recyclable
- production without additives harmful to the environment and health

PE boards with a thickness of 15 mm are attached to a beech joint with a thickness of 25 mm, thereby creating a combined board, where the beech joint ensures good physical properties and the PE board with good chemical properties. We offer PP boards in white and black.

The main advantages of PE board:

- higher chemical resistance
- good impact expansion
- shock-absorbing and impact-resistant even at low temperatures
- well weldable
- well thermoformable
- waterproof
- very good electrical insulation capabilities
- recommended for food storage
- physiologically unsuspicious
- suitable for contact with drinking water

Do you have further questions?

Do you have a question about this product? Write to us and we will be happy to answer you.