Workbench container Economy EPO 03D

Beech joint worktops, width 1500 or 2000 mm x depth 750 mm, thickness 25, 40 or 50 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges.

Worktop beech joint, width 2000 x depth 750 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 850 mm.

Worktop beech joint, width 2000 x depth 750 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 860 mm.

Worktop beech joint, width 1500 x depth 750 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 860 mm.

Worktop beech joint, width 1500 x depth 750 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 835 mm.

Worktop beech joint, width 2000 x depth 750 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 835 mm.

Worktops beech multiplex, width 1500 or 2000 mm x depth 750 mm, thickness 40 mm. Made of layered and glued beech veneer, sanded and treated with a solution of linseed oil with additives, chamfered upper peripheral edges.

Worktop beech multiplex, width 2000 mm x depth 750 mm, thickness 40 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 850 mm.

Beech joint worktops, width 1500 or 2000 mm x depth 750 mm, thickness 25, 40 or 50 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 40 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 850 mm.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 50 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 860 mm.

Worktop beech joint, width 1500 mm x depth 750 mm, thickness 50 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 860 mm.

Worktop beech joint, width 1500 mm x depth 750 mm, thickness 25 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 835 mm.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 25 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 835 mm.

Worktops beech joint, width 1500 or 2000 mm x depth 750 mm, thickness 25 or 40 mm. The front edge of the board is plated with zinc or stainless steel sheet 1 mm thick in a U shape - the board is thus protected from three sides. The upper part of the plate is lowered in the place of plating so that there is no step.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 40 mm. The front edge of the board is plated with a 1 mm thick U-shaped zinc sheet - the board is thus protected from three sides. The upper part of the plate is lowered in the place of plating so that there is no step.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 25 mm. The front edge of the board is plated with a 1 mm thick U-shaped zinc sheet - the board is thus protected from three sides. The upper part of the plate is lowered in the place of plating so that there is no step.

Worktop beech joint, width 1500 mm x depth 750 mm, thickness 25 mm. The front edge of the board is plated with a 1 mm thick U-shaped zinc sheet - the board is thus protected from three sides. The upper part of the plate is lowered in the place of plating so that there is no step.

Worktops beech joint, width 1500 or 2000 mm x depth 750 mm, thickness 25 or 40 mm. The plate is plated with zinc or stainless steel 1 mm thick. It covers the entire surface of the board and 3/4 of the front edge.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 40 mm. The plate is plated with 1 mm thick zinc sheet. It covers the entire surface of the board and 3/4 of the front edge.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 25 mm. The plate is plated with zinc sheet 1 mm thick. It covers the entire surface of the board and 3/4 of the front edge.

Worktop beech joint, width 1500 mm x depth 750 mm, thickness 25 mm. The plate is plated with 1 mm thick zinc sheet. It covers the entire surface of the board and 3/4 of the front edge.

Worktops beech joint with rubber, width 1500 or 2000 mm x depth 750 mm, thickness 25 or 40 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges. There is a choice of smooth rubber with a thickness of 4 mm, rubber with a wheel pattern with a thickness of 4 mm or grooved rubber with a thickness of 6 mm.

Worktop beech joint with rubber, width 2000 mm x depth 750 mm, thickness 25 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges.

Worktop beech joint with rubber, width 1500 mm x depth 750 mm, thickness 25 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges.

Worktop beech joint with rubber, width 2000 mm x depth 750 mm, thickness 40 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges.

LTD worktops with rubber, width 1500 or 2000 mm x depth 750 mm, thickness 25 mm, color of the board light gray. There is a choice of smooth rubber with a thickness of 4 mm, rubber with a wheel pattern with a thickness of 4 mm or grooved rubber with a thickness of 6 mm.

LTD worktop with rubber, width 2000 mm x depth 750 mm, thickness 25 mm, color of the board light gray.

LTD worktops, width 1500 or 2000 mm x depth 750 mm, thickness 25 mm, board color light gray RAL 7035, ABS edge 2 mm.

LTD worktop, width 2000 mm x depth 750 mm, thickness 25 mm, board color light gray RAL 7035, ABS edge 2 mm.

Beech joint worktops with PP or PE board, width 1500 or 2000 mm x depth 750 mm, thickness 25 + 15 mm. This is how a combined board is created, where the beech joint provides good physical properties and the PP and PE boards in turn provide good chemical properties. The color of the plates is white.

Beech joint worktop with PE board, width 1500 mm x depth 750 mm, thickness 25 + 15 mm. This is how a combined board is created, where the beech joint ensures good physical properties and the PE board, in turn, good chemical properties. The color of the plates is white.

Worktop beech joint with PE board, width 2000 mm x depth 750 mm, thickness 25 + 15 mm. This is how a combined board is created, where the beech joint ensures good physical properties and the PE board, in turn, good chemical properties. The color of the plates is white.

Beech joint worktop with PP board, width 2000 mm x depth 750 mm, thickness 25 + 15 mm. This is how a combined board is created, where the beech joint ensures good physical properties and the PP board, in turn, good chemical properties. The color of the plates is white.

Bit holder, set of 5 pcs.

Single hook 45° - length 35 mm, set of 5 pcs.

Single hook 90° - length 35 mm, set of 5 pcs.

Hook loop 0° - length 50 mm, set of 5 pcs.

Hook loop 45° - length 60 mm, set of 5 pcs.

Hook loop 90° - length 60 mm, set of 5 pcs.

Bar for hanging plastic boxes - length 100 mm. Set of 5 pcs.

Storage box, set of 5 pcs. Height 30 x width 150 x depth 80 mm.

1/4 socket head holder, set of 5 pcs.

Socket socket holder 1/2", set of 5 pcs. Color galvanized.

Allen key holder, set of 5 pcs. Color of zinc.

Key holder 1, set of 5 pcs.

Key holder 2, set of 5 pcs. Color of zinc.

Key holder 3, set of 5 pcs. Color of zinc.

Key holder 4, set of 5 pcs. Color of zinc.

Magnetic holder, set of 5 pcs. Color of zinc.

Cable holder, set of 5 pcs. Color of zinc.

Spray holder, set of 5 pcs. Color of zinc.

File holder, set of 5 pcs. Color of zinc.

Ratchet holder, set of 5 pcs.

Screwdriver holder, set of 5 pcs. Color of zinc.

Punch holder, set of 5 pcs. Color of zinc.

Double hook 0° - length 50 mm, set of 5 pcs.

Double hook 45° - length 35 mm, set of 5 pcs.

Double hook 90° - length 35 mm, set of 5 pcs.

Single hook 0° - length 50 mm, set of 5 pcs.

Set of brackets for the Q-system QDN 5001.

Set of holders for Q-system QDN 5002.

Set of brackets for Q-system QDN 5003.

Set of holders for Q-system QDN 5004.

Hanging shelf 600 mm.

Drawer rail holder, 1 pc.

Hanging shelf 300 mm, 1 pc.

A4 document holder, price for 1 pc. Height 260 x width 227 x depth 25 mm.

Internal division of VND EPO 11A sockets. Installation is possible in sockets where the height of the socket front is 60 and 90 mm. Dimensions 47 x 538 x 457 mm.

Internal division of sockets VND EPO 11B. Installation is possible in sockets where the height of the socket front is 60 and 90 mm. Dimensions 47 x 538 x 457 mm.

Internal division of sockets VND EPO 11C. Installation is possible in sockets where the height of the socket front is 60 and 90 mm. Dimensions 47 x 538 x 457 mm.

Economy workshop table. 25 mm thick beech joint plate. Width 1500 mm, depth 750 mm, fixed table height 835 mm, container with five drawers. The 620 x 600 mm container can be attached on the right or left, 1 x 60, 4 x 150 mm drawer. Body color RAL 7031 dark gray.

Six-drawer workshop cabinet, width 620, height 1000, depth 600 mm. Body color gray RAL 7031, drawer color green RAL 6001, blue RAL 5012, red RAL 3000, light gray RAL 7035 or yellow RAL 1023. 1x drawer 90, 5x 150 mm.

Economy one-door workshop cabinet. Height 1800 x width 620 x depth 600 mm, 4 adjustable shelves. Body color gray RAL 7031, door color green RAL 6001, blue RAL 5012, red RAL 3000 or yellow RAL 1023.

Economy one-door workshop cabinet. Height 1800 x width 620 x depth 600 mm, 4 adjustable shelves, 3 drawers. Body color gray RAL 7031, door color green RAL 6001, blue RAL 5012, red RAL 3000, light gray RAL 7035 or yellow RAL 1023.

Workshop service cart, width 620, height 930, depth 600 mm. 6 drawers. Upper surface with rubber and frame to prevent objects from falling out. Body color gray RAL 7031, drawer fronts green RAL 6001, blue RAL 5012, red RAL 3000, light gray RAL 7035 or yellow RAL 1023. 1x drawer 60, 2x 90, 1x 120, 2x 150 mm.

Economy one-door workshop cabinet. Height 1800 x width 620 x depth 600 mm, 3 adjustable shelves, 8 drawers. Body color gray RAL 7031, door color green RAL 6001, blue RAL 5012, red RAL 3000, light gray RAL 7035 or yellow RAL 1023.

Eight-drawer workshop cabinet, width 620, height 1000, depth 600 mm. Body color gray RAL 7031, drawer color green RAL 6001, blue RAL 5012, red RAL 3000, light gray RAL 7035 or yellow RAL 1023. 2x drawer 60, 2x 90, 2x 120, 2x 150 mm.

Five-drawer workbench container, width 620, height 810, depth 600 mm. Body color gray RAL 7031, drawer color green RAL 6001, blue RAL 5012, red RAL 3000, light gray RAL 7035 or yellow RAL 1023. 1x drawer 60, 4x 150 mm.

Economy workshop table. 25 mm thick beech joint plate. Width 1500 mm, depth 750 mm, fixed table height 835 mm. Color gray RAL 7031.

Economy workshop table. 25 mm thick beech joint plate. Width 1500 mm, depth 750 mm, fixed table height 835 mm, 1x suspended drawer EPZ_01_A, drawer height 90 mm. Body color RAL 7031 dark gray.

Hanging desk drawer, width 620, height 180, depth 600 mm. Body color gray RAL 7031, drawer color green RAL 6001, blue RAL 5012, red RAL 3000, light gray RAL 7035 or yellow RAL 1023. 1x drawer 90 mm.