Workshop table leg HDZ-T02

Beech joint worktops, width 1500 or 2000 mm x depth 750 mm, thickness 25, 40 or 50 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges.

Worktop beech joint, width 2000 x depth 750 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 850 mm.

Reinforcing connector type DPT 01 A, 1200 x 100 x 48 mm, color light gray RAL 7035.

Reinforcing connector type DPT 02 A, 1700 x 100 x 48 mm

Worktop beech joint, width 2000 x depth 750 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 860 mm.

Worktop beech joint, width 1500 x depth 750 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 860 mm.

Worktop beech joint, width 1500 x depth 750 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 835 mm.

Worktops beech multiplex, width 1500 or 2000 mm x depth 750 mm, thickness 40 mm. Made of layered and glued beech veneer, sanded and treated with a solution of linseed oil with additives, chamfered upper peripheral edges.

Worktop beech multiplex, width 2000 mm x depth 750 mm, thickness 40 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 850 mm.

Beech joint worktops, width 1500 or 2000 mm x depth 750 mm, thickness 25, 40 or 50 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 40 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 850 mm.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 50 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 860 mm.

Worktop beech joint, width 1500 mm x depth 750 mm, thickness 50 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 860 mm.

Worktop beech joint, width 1500 mm x depth 750 mm, thickness 25 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 835 mm.

Worktops beech joint, width 1500 or 2000 mm x depth 750 mm, thickness 25 or 40 mm. The front edge of the board is plated with zinc or stainless steel sheet 1 mm thick in a U shape - the board is thus protected from three sides. The upper part of the plate is lowered in the place of plating so that there is no step.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 40 mm. The front edge of the board is plated with a 1 mm thick U-shaped zinc sheet - the board is thus protected from three sides. The upper part of the plate is lowered in the place of plating so that there is no step.

Worktop beech joint, width 1500 mm x depth 750 mm, thickness 25 mm. The front edge of the board is plated with a 1 mm thick U-shaped zinc sheet - the board is thus protected from three sides. The upper part of the plate is lowered in the place of plating so that there is no step.

Worktops beech joint, width 1500 or 2000 mm x depth 750 mm, thickness 25 or 40 mm. The plate is plated with zinc or stainless steel 1 mm thick. It covers the entire surface of the board and 3/4 of the front edge.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 40 mm. The plate is plated with 1 mm thick zinc sheet. It covers the entire surface of the board and 3/4 of the front edge.

Worktop beech joint, width 1500 mm x depth 750 mm, thickness 25 mm. The plate is plated with 1 mm thick zinc sheet. It covers the entire surface of the board and 3/4 of the front edge.

Worktops beech joint with rubber, width 1500 or 2000 mm x depth 750 mm, thickness 25 or 40 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges. There is a choice of smooth rubber with a thickness of 4 mm, rubber with a wheel pattern with a thickness of 4 mm or grooved rubber with a thickness of 6 mm.

Worktop beech joint with rubber, width 1500 mm x depth 750 mm, thickness 25 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges.

Worktop beech joint with rubber, width 2000 mm x depth 750 mm, thickness 40 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges.

LTD worktops with rubber, width 1500 or 2000 mm x depth 750 mm, thickness 25 mm, color of the board light gray. There is a choice of smooth rubber with a thickness of 4 mm, rubber with a wheel pattern with a thickness of 4 mm or grooved rubber with a thickness of 6 mm.

LTD worktops, width 1500 or 2000 mm x depth 750 mm, thickness 25 mm, board color light gray RAL 7035, ABS edge 2 mm.

Beech joint worktops with PP or PE board, width 1500 or 2000 mm x depth 750 mm, thickness 25 + 15 mm. This is how a combined board is created, where the beech joint provides good physical properties and the PP and PE boards in turn provide good chemical properties. The color of the plates is white.

Beech joint worktop with PE board, width 1500 mm x depth 750 mm, thickness 25 + 15 mm. This is how a combined board is created, where the beech joint ensures good physical properties and the PE board, in turn, good chemical properties. The color of the plates is white.

Worktop beech joint, width 2000 x depth 750 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. Height with legs or containers 835 mm.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 25 mm. On three sides, the raised edge is made of 25 mm thick beech joint, the height of the edges is 120 mm. Can be supplemented with different types of legs, containers, drawer cabinets and attachments. The height of the work surface with legs or containers is then 835 mm.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 25 mm. The front edge of the board is plated with a 1 mm thick U-shaped zinc sheet - the board is thus protected from three sides. The upper part of the plate is lowered in the place of plating so that there is no step.

Worktop beech joint, width 2000 mm x depth 750 mm, thickness 25 mm. The plate is plated with zinc sheet 1 mm thick. It covers the entire surface of the board and 3/4 of the front edge.

Worktop beech joint with rubber, width 2000 mm x depth 750 mm, thickness 25 mm. Made of continuously glued beech prisms, sanded and treated with a solution of linseed oil with additives, beveled upper peripheral edges.

LTD worktop with rubber, width 2000 mm x depth 750 mm, thickness 25 mm, color of the board light gray.

LTD worktop, width 2000 mm x depth 750 mm, thickness 25 mm, board color light gray RAL 7035, ABS edge 2 mm.

Worktop beech joint with PE board, width 2000 mm x depth 750 mm, thickness 25 + 15 mm. This is how a combined board is created, where the beech joint ensures good physical properties and the PE board, in turn, good chemical properties. The color of the plates is white.

Beech joint worktop with PP board, width 2000 mm x depth 750 mm, thickness 25 + 15 mm. This is how a combined board is created, where the beech joint ensures good physical properties and the PP board, in turn, good chemical properties. The color of the plates is white.

Basic version of the leg type DPN 01 A, height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.

Leg with swivel wheels with brake type DPN 02AO, height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.

Leg with fixed wheels type DPN 02AP, height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.

Leg with lockable door and shelf type DPN 01C, height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.

Leg with two electric sockets 230V / 16A type DPN 01AE 01, height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.

Leg with two electrical sockets 230V / 16A and two quick couplings for air connection. Height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.

Leg with two quick couplings for air connection. Height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.

Leg with one electrical socket 230V / 16A, one el. 400V / 16A socket and two quick connectors for air connection. Height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.

Leg with one electrical socket 230V / 16A and one electrical socket 400V / 16A. Height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.

Basic version of the leg type HDZ-T01, height 810 mm, width 150 mm, depth 699 mm, color light gray RAL 7035.