Call FREE 800 888 868, Mon-Thurs 8:00-17:00, Fri 8:00-16:00

0.00 Eur

Total excluding VAT:
0.00 Eur
Total to be paid with VAT:
0.00 Eur

Workshop tool box NAR 01A

Code: NAR_01_A

Workshop tool box, width 500, height 1030, depth 500 mm. Upper storage area with a rubber pad and an edge to prevent small objects full description and parameters

Color of drawers / doors:

Door version:

Variants of the lock:

Selected variants in stock or on the way, others on order 3-5 weeks.

Variants in stock

177.60 Eur 214.90 Eur with VAT

Quantity

First select the parameters

Description and technical parameters

Workshop tool box NAR 01A

Workshop tool box, width 500, height 1030, depth 500 mm. Upper storage area with a rubber pad and an edge to prevent small objects from falling through. Body color gray RAL 7035. In stock in door color blue RAL 5012.

  • single-door lockable
  • upper storage area with rubber pad and edge to prevent small objects from falling over
  • three shelves
  • shelf load capacity 20 kg
  • body capacity 200 kg
  • Q-system on the inside of the door
  • height with laminate board 1018 mm
  • height with beech joint 1025 mm
Height: 1030 mm
Width: 500 mm
Depth: 500 mm
Mass: 35.2 kg
Execution: with shelves
Number of shelves: 3
Welded product: Yes
Warranty (years): 2
Manufacturer:

All models

Code Currently browsing NAR_01_A NAR_01_AS NAR_01_AL
Height 1030 mm 1030 mm 1030 mm
Width 500 mm 500 mm 500 mm
Depth 500 mm 500 mm 500 mm
Mass 35.2 kg 35.2 kg 35.2 kg
Execution with shelves with shelves with shelves
Number of shelves 3 3 3
Welded product Yes Yes Yes
In stock Yes No No
Price without VAT 177.60 Eur 192.53 Eur 189.79 Eur

In stock

Code Variant name Prague warehouse CR warehouse
Code: NAR_01_A_48154_244323_355863 Variant name: blue RAL 5012 (B), steel full, standard cylindrical (2 keys) Prague warehouse: 4 ks CR warehouse:

You can buy more

Similar products

Information / documents

  • Workshop table configurator
  • KOVOS worktops
  • Documents to download
KOVOS electronic workshop table configurator

KOVOS worktops are made of wood. Wood is a natural material, and therefore due to changes in temperature or humidity, the boards may slightly curve, even though special care is taken in their surface treatment. The stability of the shape of the worktop is guaranteed at a relative air humidity of 50 - 60%. Wooden table tops should definitely not come into direct contact with water and are intended exclusively for interior use. Also, the color of the boards may differ slightly from each other, depending on the input lumber used.

Highly durable worktop layered and glued from beech veneer, sanded and treated with a solution of linseed oil with additives, the upper peripheral edges are bevelled. We offer the board in a thickness of 40 mm.

Laminated chipboard LTD, we offer the board in a standard thickness of 25 mm with an ABS edge of 2 mm, shade RAL 7035 light gray.

Board with a raised edge on three sides, the edges are made of 25 mm thick beech joint, their height is 120 mm. The board is sanded and treated with a solution of linseed oil with additives, the upper peripheral edges are bevelled. We offer raised edges for beech joint thicknesses of 25, 40 and 50 mm.

The front edge of the plate is plated with galvanized or stainless steel sheet 1 mm thick. The sheeting is U-shaped, so the plate is protected from above and below. The upper part of the plate is lowered in the place of plating so that the plating continues smoothly on the plate. We offer plating for beech joints of thickness 25 and 40 mm.

There is a choice of smooth rubber with a thickness of 4 mm, rubber with a wheel pattern with a thickness of 4 mm or grooved rubber with a fine groove of 6 mm. We offer rubbers for all types of boards.

smooth rubber 4 mm

wheel pattern 4 mm

grooved rubber 6 mm

PP boards with a thickness of 15 mm are attached to a beech joint with a thickness of 25 mm, thus creating a combined board, where the beech joint ensures good physical properties and the PP board with good chemical properties. We offer PP boards in white and black.

Main advantages of PP board:

- light, stable, elastic, sterile
- high insulating ability
- high load shock absorbing
- acid resistant
- safe for food
- recyclable
- production without additives harmful to the environment and health

PE boards with a thickness of 15 mm are attached to a beech joint with a thickness of 25 mm, thereby creating a combined board, where the beech joint ensures good physical properties and the PE board with good chemical properties. We offer PP boards in white and black.

The main advantages of PE board:

- higher chemical resistance
- good impact expansion
- shock-absorbing and impact-resistant even at low temperatures
- well weldable
- well thermoformable
- waterproof
- very good electrical insulation capabilities
- recommended for food storage
- physiologically unsuspicious
- suitable for contact with drinking water